Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Exhaust Muffler To Right Catalytic Converter Nuts & Exhaust Pipe Clamp

Courtesy of GENERAL MOTORS CORP.

Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the exhaust muffler to right catalytic converter nuts.
Loosen the exhaust pipe clamp at the left catalytic converter.

Fig 2: Locating Exhaust System Hangers & Insulators

Courtesy of GENERAL MOTORS CORP.

Lubricate the insulators where the muffler assembly hangers are inserted in order to ease in removal.
With the aid of an assistant, remove the insulators from the exhaust system hangers (4, 5, and 6).
Pull the muffler assembly rearward in order to separate the muffler from the catalytic converters. Once the muffler is separated from the converters, move and rotate the muffler towards the front of the vehicle, removing the muffler from the vehicle.