LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (Engine Exhaust System) >> Repair Instructions >> Exhaust Muffler Insulator, Hanger, and Bracket Replacement (LFA) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Insulators
    GM1974326Courtesy of GENERAL MOTORS CORP.
  1. Spray lubricant if necessary, onto the exhaust system insulator hole where the frame hanger will be inserted.
  2. Install the exhaust system insulator (1, 2 or 3) to the frame hanger, as required.
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals