LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (Engine Exhaust System) >> Repair Instructions >> Exhaust Muffler Insulator, Hanger, and Bracket Replacement (1500 - LC9/LMG/LY5/L76) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to Exhaust Service Caution .
CAUTION: Refer to Protective Goggles and Glove Caution .
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    IMPORTANT: Service the exhaust hangers individually in order to retain the support of the exhaust system.
    2. Fig 1: View Of Exhaust System Insulators
    GM1709436Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not use oil base lubricants.
  2. Apply a soapy solution to the following in order to ease the removal of the hanger (1):
    • The frame support bracket rod (2)
    • The exhaust pipe hanger rod (3)
  3. Pry the exhaust pipe hanger (1) free from the following:
    • The frame support bracket rod (2)
    • The exhaust pipe hanger rod (3)
scientia non olet · About LEMON Manuals