LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (Engine Exhaust System) >> Repair Instructions >> Exhaust Muffler Insulator, Hanger, and Bracket Replacement (1500 - L92) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Exhaust System Insulators
    GM1709439Courtesy of GENERAL MOTORS CORP.
  1. Spray lubricant onto the frame hangers where the insulators will be installed.
  2. Install the exhaust pipe insulators (1 and 2) to the frame hangers and the exhaust pipe.
  3. Install the exhaust muffler insulators (3 and 4) to the frame hangers and the muffler pipe and remove the adjustable jack stand.
  4. Inspect for proper positioning and clearance of the exhaust system.
scientia non olet · About LEMON Manuals