LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (Engine Exhaust System) >> Repair Instructions >> Exhaust Manifold Heat Shield Replacement - Left Side >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Exhaust Manifold Heat Shield & Bolts
    GM1708616Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Position the exhaust manifold heat shield to the exhaust manifold and install the heat shield bolts.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  2. Install the left wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Left Side .
scientia non olet · About LEMON Manuals