LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (General Information) >> Introduction >> Vehicle, Engine and Transmission ID and VIN Location, Derivative and Usage >> Notes

Vehicle, Engine and Transmission ID and VIN Location, Derivative and Usage: Notes

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: VIN Plate Location
GM65474Courtesy of GENERAL MOTORS CORP.
Vehicle Identification Number (VIN) System

The VIN plate (1) is the legal identifier of the vehicle. The VIN plate is located on the upper left corner of the instrument panel (I/P) and can be seen through the windshield from the outside of the vehicle.
Position Definition Character Description
1 Country of Origin 1 United States
2 Manufacturer G General Motors
3 Make 5 HUMMER
4 GVWR/Brake System G 8001-9000/Hydraulic
5 Truck Line/Chassis Type K 4x4
6 Series 7 Ton Luxury
7 Body Type 3 Four-Door SUT/Cab/Utility
8 Engine Type U GM 6.0L V8 FI (RPO LQ4)
9 Check Digit - Check Digit
10 Model Year 7 2007
11 Plant Location H Mishawaka, Indiana
12-17 Plant Sequence Number - Plant Sequence Number
VIN Derivative Characters

Position Definition Character Description
All engines and transmissions are stamped with a partial VIN. This table identifies the different VIN derivative characters and their respective positions.
1 Division S HUMMER
2 Model Year 7 2007
3 Plant Location H Mishawaka, Indiana
4-9 Plant Sequence Number - Plant Sequence Number
A VIN derivative can be used to determine if a vehicle contains the original engine or transmission by matching the VIN derivative positions to their accompanying positions in the complete VIN.