LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (General Information) >> Introduction >> Lifting and Jacking the Vehicle >> Jacking >> Under the Frame Rails

Under the Frame Rails

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Frame Rail Jacking Point
GM630833Courtesy of GENERAL MOTORS CORP.
IMPORTANT: The floor jack pad must not contact rocker panel or the floor pan.

Position the floor jack pad under the frame rail pad.