LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 259 (Front Drive Axle) >> Repair Instructions >> Front Axle Vent Hose Connector Replacement (9.25 Inch Axle) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer Lifting and Jacking the Vehicle .
    2. Fig 1: View Of Vent Hose To Differential Carrier Assembly
    GM834272Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the vent hose from the vent hose connector.
    3. Fig 2: View Of Vent Hose Connector
    GM847064Courtesy of GENERAL MOTORS CORP.
  3. Remove the vent hose connector from the differential carrier assembly.
scientia non olet · About LEMON Manuals