Circuit/System Testing
WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that DTC P0231, P0232 or P023F are not set as current or history.
- If any of those codes are set, refer to DTC P0231, P0232, or P023F .
- Ensure that the entire undercarriage of the vehicle is clean, especially around the area where the FPCM is located. Clear all codes from the FPCM and test drive the vehicle. Verify that DTC P1255 or P064A do not set as current.
- If DTC P1255 or P064A reset as current, replace the FPCM.