LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Engine Control System & Fuel - 4.8L, 5.3L, 6.0L, Or 6.2L - DTC P069F To DTC P3449) >> DTC P3401, P3425, P3441, or P3449 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engine running, command the affected cylinder deactivation solenoid ON and OFF, with a scan tool, while observing the following cylinder deactivation control circuit status parameters.
    • Cylinder 1, 4, 6, or 7 solenoid control Ckt. Short Gnd Test Status
    • Cylinder 1, 4, 6, or 7 solenoid control Ckt. Open Test Status
    • Cylinder 1, 4, 6, or 7 solenoid control Ckt. Short Volts Test Status

      Each parameter should toggle between OK and Not Run or Not Run and OK

  2. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.