LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Engine Control System & Fuel - 4.8L, 5.3L, 6.0L, Or 6.2L - DTC P069F To DTC P3449) >> DTC P1255 or P064A >> Circuit/System Testing

Circuit/System Testing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that DTC P0231, P0232 or P023F are not set as current or history.
  2. Ensure that the entire undercarriage of the vehicle is clean, especially around the spare tire area where the FPCM is located. Clear all codes from the FPCM and test drive the vehicle. Verify that DTC P1255 or P064A do not set as current.
    • If DTC P1255 or P064A reset as current, replace the FPCM.