Conditions for Running the DTC

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0117, P0118, P0120, P0122, P0123, P0171, P0172, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0220, P0221, P0222, P0223, P0230, P0300, P0336, P0442, P0446, P0449, P0452, P0453, P0455, P0462, P0463, P0496, P0722, P077B, P0A3F, P0A40, P0A45, P0A46, P0C5C, P0C5D, P0C52, P0C53, P0C57, P0C58, P0C61, P0C62, P1516, P2101, P2135, P2176, P1B03, P1B04, P215C are not set.
The engine is operating for at least 60 seconds.
The engine is idling for greater than 5 seconds.
The engine coolant temperature (ECT) is more than -60°C (-76°F).
The intake air temperature (IAT) is more than -20°C (-4°F).
The barometric pressure (BARO) is more than 70 kPa.
The system voltage is between 9-18 volts.
The vehicle speed is less than 1.6 km/h (1 mph).
DTC P0506 and P0507 run continuously once the above conditions are met.