LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (Engine Control System & Fuel - 4.8L, 5.3L, 6.0L, Or 6.2L - DTC P0230 To DTC P0690) >> DTC P0341 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF. inspect the CMP sensor for correct installation.
    • If the CMP sensor is loose, inspect the sensor and the O-ring for damage, and replace as necessary.
  2. Inspect the engine for the following conditions:
    • Engine oil for debris
    • Camshaft reluctor wheel for damage
    • The timing chain, timing chain tensioner, and sprockets for wear or damage