Repair Procedures
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
- Control solenoid (w/body and TCM) valve assembly. Refer to Control Module References for replacement, setup, or programming.
- Low and reverse clutch assembly replacement. Refer to Low and Reverse Clutch Overhaul (6L80) or Low and Reverse Clutch Overhaul (6L90) .
- Lower valve body assembly. Refer to Control Valve Lower Body and Upper Body Replacement
.
- Perform the valve body inspection procedure, refer to Control Valve Upper Body Assembly Cleaning and Inspection . If the inspection procedure indicates to replace the valve body, refer to Control Valve Lower Body and Upper Body Replacement .
- Perform the Service Fast Learn Adapts .