LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Frame And Underbody) >> Repair Instructions >> Wheelhouse Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel. Refer to Tire and Wheel Removal and Installation .
  2. Fig 1: Wheelhouse Panel
    GM870778Courtesy of GENERAL MOTORS CORP.
  3. Remove push-in retainers (1).
  4. Remove the wheelhouse panel.