LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Frame And Underbody) >> Repair Instructions >> Wheelhouse Panel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Wheelhouse Panel
    GM870778Courtesy of GENERAL MOTORS CORP.
  1. Align the wheelhouse panel to the wheelhouse.
  2. Install push-in retainers (1).
  3. Install the wheel. Refer to Tire and Wheel Removal and Installation .
scientia non olet · About LEMON Manuals