LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Frame And Underbody) >> Repair Instructions >> Transmission Support Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Support the transmission with a suitable stand or jack.
    3. Fig 1: Identifying Transmission Mount Nuts
    GM647997Courtesy of GENERAL MOTORS CORP.
  3. Remove the nuts retaining the transmission mount to the transmission support.
  4. Raise the transmission.
    5. Fig 2: Transmission Support
    GM794684Courtesy of GENERAL MOTORS CORP.
  5. Remove the bolts and the nuts retaining the transmission support to the frame.
  6. Remove the transmission support from the frame.
scientia non olet · About LEMON Manuals