LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Frame And Underbody) >> Repair Instructions >> Trailer Hitch Replacement (SUV) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Trailer Hitch (SUV)
    GM796194Courtesy of GENERAL MOTORS CORP.
  1. Install the hitch to the vehicle.
  2. NOTE: Refer to Fastener Notice .
  3. Install the hitch bolts to the frame.

    Tighten:  Tighten the bolts to 100 N.m (74 lb ft).

  4. Install the electrical or air suspension components to the hitch.
  5. Install the bumper. Refer to Rear Bumper Replacement (SUT) or Rear Bumper Replacement (SUV) .