Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Reinforcement Bar & Related Components

Courtesy of GENERAL MOTORS CORP.

Remove the rear bumper. Refer to Rear Bumper Replacement (SUT) or Rear Bumper Replacement (SUV) .
Remove the bolts (4) from the trailer hitch to frame (5).

Fig 2: Air Suspension Compressor Bracket

Courtesy of GENERAL MOTORS CORP.

Remove the 2 bolts (1) from the rear edge of the air suspension compressor bracket (2).
Disconnect the electrical harness conduit from the inside of the trailer hitch.

Fig 3: Trailer Hitch (SUV)

Courtesy of GENERAL MOTORS CORP.

With the aid of an assistant, remove the trailer hitch from the frame rail.