LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Frame And Underbody) >> Repair Instructions >> Tow Hook Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the tow hook to the frame rail.
    2. NOTE: Refer to Fastener Notice .
  2. Install the bolts to the tow hook through the frame rail.

    Tighten:  Tighten the bolts to 85 N.m (63 lb ft).

  3. Install the front bumper. Refer to Front Bumper Replacement .
scientia non olet · About LEMON Manuals