LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Frame And Underbody) >> Repair Instructions >> Fuel Tank Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fuel Tank Shield & Mounting Nuts
    GM1823266Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the outer tank shield mounting nuts.
  3. Remove the inner fuel tank shield mounting nuts.
  4. With help of an assistant, remove the fuel tank shield from the vehicle.
scientia non olet · About LEMON Manuals