LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Frame And Underbody) >> Repair Instructions >> Crossmember Replacement (Lower Control Arm) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the underbody shields. Refer to Catalytic Converter Guard Replacement .
  3. Support the front differential.
    4. Fig 1: Differential Mounting Nut, Bolt & Washer
    GM821616Courtesy of GENERAL MOTORS CORP.
  4. Remove the differential mounting nut, bolt, and washer. Refer to Differential Carrier Assembly Replacement .
    5. Fig 2: Crossmember (Lower Control Arm)
    GM821952Courtesy of GENERAL MOTORS CORP.
  5. Remove the crossmember mounting bolts.
  6. Remove the crossmember from the vehicle.
scientia non olet · About LEMON Manuals