LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Frame And Underbody) >> Repair Instructions >> Catalytic Converter Guard Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement .
    3. Fig 1: Catalytic Converter Guard
    GM794712Courtesy of GENERAL MOTORS CORP.
  3. Remove the mounting bolts.
  4. Remove the guard from the vehicle.
scientia non olet · About LEMON Manuals