Circuit/System Verification
WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the drive wheels.
- Start and idle the engine.
- Place the transmission in DRIVE.
- Monitor Transmission OSS on the scan tool.
- The Transmission OSS on the scan tool should be greater than 100 RPM.