Static Test

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: You must perform the Circuit/System Testing first.

Test for 5.9 and 7.7 ohms at 20°C (68°F) between the solenoid control terminal 2 and the low reference terminal 1 at the CMP actuator solenoid.

If the resistance is not within the specified range, replace the CMP actuator solenoid. Refer to Camshaft Position Actuator and Solenoid Valve Installation .