LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 248 (Engine Control System & Fuel - Hybrid (Hp2) 6.0L (LFA) - DTC P0010 To DTC P0230) >> DTC P0010 >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
CMP Command

Display Parameters Short to Ground Open/High Resistance Short to Voltage
Operating Conditions:  Engine running above 900 RPMs in Park
Parameter Normal Range:  0-100%
CMP Command 0% 0% 0%
Desired CMP

Display Parameters Short to Ground Open/High Resistance Short to Voltage
Operating Conditions:  Engine running above 900 RPMs in Park
Parameter Normal Range:  0-31°
Desired CMP
CMP Angle

Display Parameters Short to Ground Open/High Resistance Short to Voltage
Operating Conditions:  Engine running above 900 RPMs in Park
Parameter Normal Range:  0-31°
CMP Angle
CMP Variance

Display Parameters Short to Ground Open/High Resistance Short to Voltage
Operating Conditions:  Engine running above 900 RPMs in Park
Parameter Normal Range: 
CMP Variance