LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Cable Junction Block Bracket & Bolts
    GM759636Courtesy of GENERAL MOTORS CORP.
  1. Remove the battery cable junction block bracket bolts.
    2. Fig 2: View Of Generator Bracket & Bolts (4.8L, 5.3L & 6.0L)
    GM847280Courtesy of GENERAL MOTORS CORP.
  2. Remove the generator. Refer to Generator Replacement .
  3. Remove the power steering pump. Refer to Power Steering Pump Replacement .
  4. Remove the generator bracket bolts.
  5. Remove the generator bracket.
scientia non olet · About LEMON Manuals