LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Battery, Charging System And Starting System) >> Repair Instructions >> Engine Ground Strap Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left hand catalytic convert. Refer to Catalytic Converter Replacement (4.8L and 5.3L Engines) .
    2. Fig 1: View Of Ground Cable Bolt At Engine Block
    GM663475Courtesy of GENERAL MOTORS CORP.
  2. Remove the engine wiring harness ground bolt.
  3. Lower the vehicle.
    4. Fig 2: View Of Ground Strap Nut At Front Of Dash Stud
    GM663474Courtesy of GENERAL MOTORS CORP.
  4. Remove the ground strap nut from the stud at the front of dash.
  5. Remove the ground strap from the stud.
scientia non olet · About LEMON Manuals