Scan Tool Data List
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Powertrain Control Module (PCM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON/Engine OFF | |||
| Crank Request Signal | Engine Data 1 | Yes/No | No |
| Ignition 1 Signal | Engine Data 1, Engine Data 2 | Volts | 9-14 V |
| GEN L-Terminal Signal Command | Engine 2 Data | On/Off | Off |
| GEN F-Terminal Signal | Engine 2 Data | % | 10-90% |
| TR Sw. | Engine Data 2 | Park, Reverse, Neutral, Drive 4, Drive 3, Drive 2, Drive 1, Invalid | Park |