AFIT Test Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Turn OFF all accessories.
Turn OFF the ignition.
Install the AFIT. Refer to the AFIT User Guide.
Turn ON the AFIT and select the vehicle.
Turn ON the ignition and perform the Injector Test.
- If the AFIT aborts testing due to fuel pressure or fuel leak down, refer to Fuel System Diagnosis (w/o FPCM) or Fuel System Diagnosis (w/FPCM) .
View the test results.
- If any injector exceeds the recommended tolerance, replace the injector(s), E-85 only. All other engine, refer to Fuel Injector Cleaning .