Component Testing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Use the Spark Plug Inspection procedure to verify the integrity of the spark plugs. Refer to Spark Plug Inspection . Replace the spark plug if necessary.
- Use the J 26792 to verify the output of each ignition module/coil. See Special Tools . If no spark is detected across the gap of the spark plug tester, then replace the ignition module/coil assembly.
IMPORTANT:
An erratic or weak spark is considered a no spark condition.