Low and Reverse Clutch Plate Installation
WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the waved plate.
- Install the correct selective spacer plate (from the selection procedure).
- Install the five fiber plate assemblies and four steel plates, starting with one fiber plate assembly and alternating with steel.
- Index the steel plate splines in the case as shown.