Clutch Backing Plate Retaining Ring Specifications (6L90)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
3-5 Reverse Clutch
| Clutch Pack Travel Specification - 1.50-2.08 mm (0.059-0.082 in) | ||
|---|---|---|
| Retaining Ring Thickness | O.D. Color | |
| Metric | English | |
|
IMPORTANT:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
|
||
| 1.61-1.71 mm | 0.063-0.067 in | Gray |
| 1.88-1.98 mm | 0.074-0.078 in | Light Green |
| 2.15-2.25 mm | 0.085-0.089 in | Yellow |
| 2.42-2.52 mm | 0.095-0.099 in | None |
| 2.69-2.79 mm | 0.106-0.110 in | Purple |
1-2-3-4 Clutch
| Clutch Pack Travel Specification - 1.79-2.25 mm (0.070-0.089 in) | ||
|---|---|---|
| Retaining Ring Thickness | O.D. Color | |
| Metric | English | |
|
IMPORTANT:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
|
||
| 2.42-2.52 mm | 0.095-0.099 in | None |
| 2.69-2.79 mm | 0.106-0.110 in | Purple |
| 2.96-3.06 mm | 0.117-0.120 in | Light Blue |
| 3.23-3.33 mm | 0.127-0.131 in | Orange |
| 3.50-3.60 mm | 0.138-0.142 in | White |
4-5-6 Clutch
| Clutch Pack Travel Specification - 1.18-1.79 mm (0.059-0.082 in) | ||
|---|---|---|
| Retaining Ring Thickness | O.D. Color | |
| Metric | English | |
|
IMPORTANT:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
|
||
| 1.60-1.70 mm | 0.063-0.067 in | Yellow |
| 2.02-2.12 mm | 0.080-0.083 in | None |
| 2.44-2.54 mm | 0.096-0.100 in | Purple |