LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 232 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Specifications >> Third and Fourth Clutch Backing Plate Selection

Third and Fourth Clutch Backing Plate Selection

WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
3rd and 4th Clutch Backing Plate Selection Table

Dimension Identification
5.88-5.68 mm (0.231-0.224 in) A
4.99-4.76 mm (0.196-0.187 in) B
4.10-3.90 mm (0.161-0.154 in) C
Use a backing plate which gives the correct travel. The travel should be 2.10-0.90 mm (0.083-0.035 in).
scientia non olet · About LEMON Manuals