Special Tools

WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Illustration	Tool Number/Description
Courtesy of GENERAL MOTORS CORP.	DT-48021 Seal Installer
Courtesy of GENERAL MOTORS CORP.	DT-48022 Output Bushing Installer
Courtesy of GENERAL MOTORS CORP.	DT-48209 Bushing Remover
Courtesy of GENERAL MOTORS CORP.	DT-48210 Seal Installer
Courtesy of GENERAL MOTORS CORP.	DT-48211 Drive Sprocket Bearing Installer
Courtesy of GENERAL MOTORS CORP.	DT-48212 Input Shaft Pilot Bearing Installer
Courtesy of GENERAL MOTORS CORP.	DT-48213 Clutch Pack Height Gage
Courtesy of GENERAL MOTORS CORP.	DT-48734 Extension Housing Bushing Replacer
Courtesy of GENERAL MOTORS CORP.	J 2619-O1 Slide Hammer
Courtesy of GENERAL MOTORS CORP.	J 3289-20 Holding Fixture
Courtesy of GENERAL MOTORS CORP.	J 8092 Driver Handle
Courtesy of GENERAL MOTORS CORP.	J 35512 Inner Pinion Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 42738 Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 43484 Front Output Shaft Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 44737 Shift Rail Bearing Remover
Courtesy of GENERAL MOTORS CORP.	J 44907 Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 45278 Seal Remover
Courtesy of GENERAL MOTORS CORP.	J 45380 Transfer Case Rear Bushing Remover and Installer
Courtesy of GENERAL MOTORS CORP.	J 45759 Assembly Fixture