Transfer Case Holding Fixture Installation

WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transfer Case Holding Fixture

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Transfer Case Nuts Special Tools: J 45759 Assembly Fixture
2	Transfer Case Special Tools: J 3289-20 Holding Fixture
3	Pivot Pin Tip: Always secure with the pivot pin after rotating. The transfer case can be rotated 360 degrees to facilitate repair.