LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 231 (Transfer Case - Mp 3023/3024-NQH) >> Repair Instructions - Off Vehicle >> Transfer Case Disassemble >> Front Output Shaft Assembly Removal

Front Output Shaft Assembly Removal

WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Output Shaft Assembly
GM1849351Courtesy of GENERAL MOTORS CORP.
Front Output Shaft Assembly Removal

Callout Component Name
1 Transfer Case Front Case Half
Tip:  Place the front case half on an arbor press.
2 Transfer Case Front Output Shaft Assembly
Tip:  Press the front output shaft assembly from the front case half using an arbor press or soft-face hammer.
3 Transfer Case Front Output Shaft Seal
scientia non olet · About LEMON Manuals