Access Hole Plugs, Fill and Drain Plug, Vent, 2/4 Wheel Drive Actuator, Actuator Shaft Position Sensor, and Vehicle Speed Sensor Removal
WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Access Hole Plugs, Fill and Drain Plug, Vent, 2/4 Wheel Drive Actuator, Actuator Shaft Position Sensor, and Vehicle Speed Sensor
Access Hole Plugs, Fill and Drain Plug, Vent, 2/4 Wheel Drive Actuator, Actuator Shaft Position Sensor, and Vehicle Speed Sensor Removal
| Callout | Component Name |
|---|---|
| 1 | Transfer Case Actuator Shaft Position Sensor Bolt/Screw |
| 2 | Transfer Case Actuator Shaft Position Sensor Assembly |
| 3 | Transfer Case Actuator Shaft Position Sensor O-Ring Seal |
| 4 | Transfer Case Two/Four Wheel Drive Actuator Bolt/Screw |
| 5 | Transfer Case Two/Four Wheel Drive Actuator Assembly |
| 6 | Transfer Case Oil Drain Plug |
| 7 | Transfer Case Oil Fill Plug |
| 8 | Transfer Case Vent Tip: Remove ONLY if the vent pipe is damaged. |
| 9 | Vehicle Speed Sensor Assembly |
| 10 | Vehicle Speed Sensor O-Ring Seal |
| 11 | Transfer Case Access Hole Plugs (Qty: 2) |