LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 231 (Transfer Case - Mp 3023/3024-NQH) >> Diagnostic Information and Procedures >> Transfer Case Grating Noise

Transfer Case Grating Noise

WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Cause Correction
DEFINITION: A faulty internal transfer case component that causes a grating noise in the transfer case while in the AWD, 4HI, or 4LO mode.
Review the Symptoms - Transfer Case  and perform the necessary inspections.
Broken clutch apply plate
  1. Inspect for a broken clutch apply plate. Refer to Transfer Case Disassemble  and Transfer Case Assemble .
  2. Replace the apply plate and the transfer case components that are damaged from debris. Refer to Transfer Case Disassemble  and Transfer Case Assemble .
Faulty control actuator lever thrust bearings
  1. Inspect for faulty control actuator lever thrust bearings. Refer to Two/Four Wheel Drive Shift Components Cleaning and Inspection .
  2. Recondition the transfer case components that are damaged from debris. Refer to Transfer Case Disassemble  and Transfer Case Assemble .