MP 3023 ATC, Common to LD

WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The input shaft pilot bearing assembly is smaller than the MP 3024 ATC in order to accommodate the smaller rear output shaft. The outer diameter measures 38.1 mm (1.5 in).
The rear output shaft is smaller than the MP 3024 ATC.
The front output shaft drive sprocket is 27.2 mm (1.071 in) wide.
The front output shaft driven sprocket is 29.4 mm (1.157 in) wide.
The rear output shaft seal is smaller than the MP 3024 ATC. The inner lip diameter measures 46.1 mm (1.815 in).
The rear output shaft bushing is smaller than the MP 3024 ATC. The inner diameter measures 48 mm (1.890 in).
The rear case half has smaller bores than the MP 3024 ATC in order to accommodate the rear output shaft seal and the rear output shaft bushing.
The control lever is thinner than the MP 3024 ATC, measuring 9.5 mm (0.374 in) between the bearing surfaces.
The control actuator lever is thinner than the MP 3024 ATC, measuring 9.5 mm (0.374 in) between the bearing surfaces.
The control actuator lever balls are larger than the MP 3024 ATC, measuring 13 mm (0.512 in) in diameter.
The control actuator lever washer is thinner than the MP 3024 ATC, measuring 1 mm (0.039 in).