Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Air Cleaner Components

Courtesy of GENERAL MOTORS CORP.

Install the NEW air filter element.
Install the air cleaner housing cover.

NOTE: Refer to Fastener Notice .

Tighten the air cleaner housing screws.
Tighten: Tighten the screws to 3 N.m (27 lb in).

Fig 2: View Of MAF/IAT Sensor & Wiring Harness Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the engine harness electrical connector (2) to the MAF/IAT sensor (1).