LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 228 (Suspension Control System - Suspension Damping) >> Diagnostic Information and Procedures >> DTC C0575, C0580, C0585, or C0590 >> Component Testing

Component Testing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the appropriate suspension damper.
  2. Test for less than 2 ohms between the control terminal A and the low reference terminal B of the suspension damper.
    • If not within the specified range, replace the suspension damper.
scientia non olet · About LEMON Manuals