Auxiliary Fluid Pump Installation
WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | A/Trans Auxiliary Fluid Pump Gasket
NOTE:
The auxiliary fluid pump gasket is not re-usable. Use a NEW gasket when replacing or damage may occur.
|
| 2 | A/Trans Auxiliary Fluid Pump Assembly
NOTE:
Do not damage the case sealing surface when removing or installing the pump and motor assembly.
|
| 3 | A/Trans Auxiliary Fluid Pump Bolt M6 x 1.0 x 65 (Qty: 4)
NOTE:
Refer to Fastener Notice
.
Tighten: Tighten to 9-13 N.m (80-115 lb in). |