LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Automatic Transmission - 2ML70 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Diagnostic Information and Procedures >> Road Test >> Manual Downshifts >> Accelerating Upshifts

Accelerating Upshifts

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the gear selector in the M position.
  2. Press the - until the display shows M1.
  3. Accelerate slowly and keep the throttle steady not going over 3,000 RPM Engine speed.
  4. Press the + on the gear selector.
  5. Verify the upshift occurs as commanded. Repeat step 4 to verify the remaining gears.