LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Automatic Transmission - 2ML70 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Diagnostic Information and Procedures >> No Fourth Gear

No Fourth Gear

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
Checks Causes
4th Clutch Assembly
  • Inspect for damaged or worn clutch plates.
  • Inspect for damaged piston, piston dam, dam retaining ring, and clutch spring.
  • Inspect for improper selective 4th clutch backing plate retaining ring.
  • Inspect for cut, worn, or damaged turbine shaft fluid seal rings.
  • Inspect for damaged or distorted turbine shaft.
Control Valve Upper Body Assembly Inspect the 12-3-4 clutch regulator valve and spring for wear or damage.
Output Shaft Assembly Inspect for damaged or stripped internal splines on the output shaft assembly.