LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Automatic Transmission - 2ML70 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Diagnostic Information and Procedures >> No First and Reverse Gears

No First and Reverse Gears

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
Checks Causes
Hybrid Low 1-2 Clutch Assembly
  • Inspect for damaged or worn low and 1-2 clutch plates.
  • Inspect for damaged 1-2 clutch backing plate. Inspect for worn splines on backing plate.
  • Inspect for damaged 1-2 clutch backing plate retaining ring.
  • Inspect for damaged 1-2 clutch piston assembly, spring, spring retaining ring, and center support assembly.
Output Carrier Assembly Inspect for damaged or stripped splines on the output carrier assembly.