LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Hybrid Engine Control System) >> Diagnostic Information and Procedures >> DTC P0642, P0643, P0652, or P0653 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

The drive motor generator power inverter module (PIM) contains two motor control modules (MCM) and a hybrid powertrain control module (HPCM). Each MCM utilizes a 5 Volt reference power supply for internal circuit needs. This fault is handled inside the PIM and no external circuits are involved.