LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Fixed And MOVEABLE Windows) >> Repair Instructions >> Midgate Window Regulator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the midgate inner panel. Refer to Midgate Inner Panel Replacement .
  2. Remove the midgate window. Refer to Midgate Window Replacement .
  3. Remove the nuts retaining the window regulator to the midgate.
  4. Slide the window regulator assembly to one side of the structure.
    5. Fig 1: Midgate Window Regulator
    GM1477813Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the midgate window regulator electrical connector.
  6. Remove the regulator from the midgate. A slight twisting motion is required for removal.
scientia non olet · About LEMON Manuals