LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Fixed And MOVEABLE Windows) >> Repair Instructions >> Midgate Window Regulator Motor Assembly >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new window motor to the window regulator.
  2. NOTE: Refer to Fastener Notice .
  3. Install the screws.

    Tighten:  Tighten the screws to 6 N.m (53 lb in).

  4. Fig 1: Midgate Window Regulator
    GM1477813Courtesy of GENERAL MOTORS CORP.
  5. Install the window regulator assembly. Refer to Midgate Window Replacement .
  6. Reposition the rear seats.