LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Fixed And MOVEABLE Windows) >> Repair Instructions >> Midgate Window Channel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the midgate inner panel. Refer to Midgate Inner Panel Replacement .
    2. Fig 1: Midgate Window
    GM1412518Courtesy of GENERAL MOTORS CORP.
  2. Remove the midgate window. Refer to Midgate Window Replacement .
    3. Fig 2: Midgate Window Run Channels
    GM1412517Courtesy of GENERAL MOTORS CORP.
  3. Remove the screws retaining the midgate window run channels.
  4. Disconnect the electrical connectors.
  5. Remove the wiring harness retainer from the window run channel brackets.
  6. Remove the window run channels from the midgate.
scientia non olet · About LEMON Manuals